Enhancement or correction?
A single-stage enhancement uses one polishing step to boost gloss and reduce light defects. Two-stage correction first uses a more cutting compound to level heavier defects, then refines the finish for clarity and depth. It takes longer and achieves a higher level of defect reduction.
Where a defect is too deep for compound alone and paint depth readings allow it, a panel may be carefully wet sanded first, then polished back through several stages to restore clarity. It isn't part of every two-stage correction, isn't suitable for every car or panel, and is only considered after inspection and paint depth readings. The photo shows sanding in progress, not a finished result.

Why an inspection matters
We inspect the paint under specialist lighting and take paint depth readings before starting. That tells us what's realistically achievable — and means you know what to expect before you commit.
Careful preparation before correction
Before any polishing, glass, rubber seals and trim edges are masked, so compounds and pads only touch the paint being worked on and nearby surfaces stay protected.
The finished result
This grey Nissan Skyline R32 GT-R had a multi-stage paint correction, followed by a ceramic coating.

Defects we can improve
- Swirl marks — fine circular scratches from washing
- Light scratches — marks that haven't gone through the clear coat
- Oxidation — chalky, faded paint
- Holograms — buffer trails left by poor previous polishing
- Mineral etching — water-spot marks
- Bird-dropping etching — often improved, sometimes only reduced
Honest about limits
Some defects are too deep to remove safely. If a scratch catches your fingernail, it may have gone through the clear coat. Clear coat is finite, so we always prioritise preserving it over chasing a perfect result that would compromise your paint's long-term health.
What goes into a two-stage correction?
The first stage uses a more cutting compound to reduce swirls and correctable defects. The second refines the finish to bring back gloss and clarity.
It takes the right machine, pads and compounds, careful paint inspection, and time — often working one section at a time. Deeper defects may remain where removing them would thin the clear coat too far.
DMS Car Care carrying out the cutting (first) stage of a two-stage paint correction with a machine polisher on the bonnet of a red Mk2 Volkswagen Golf GTI.Who it's suitable for
Cherished, dark-coloured or enthusiast cars with noticeable swirling and scratching.
What you can reasonably expect
A big reduction in visible marks. Deeper scratches may not be safely removable — keeping enough clear coat comes first.
Combining treatments
Good preparation for a ceramic coating (quoted together).
Complete your detail
Optional extras that suit this service. Prices are confirmed before any work begins.
What can affect the price
Vehicle size, paint hardness and severity of defects — scoped before quoting.
In general, your quote depends on:
- Vehicle size band (small, medium, large, extra large)
- Any bolt-ons you choose, such as wheels-off cleaning or seat removal
- Exceptional contamination only — e.g. spilt paint, vomit, flood damage, mould or smoke/fire damage
- Damage such as keyed paint or collision scuffs, which needs inspection first
Not sure this is the right treatment? Try our detailing advisor or call us for honest advice.
